1
Download Fagor
Transcript
Basic operation: 2 B 3 1 5 6 B 6 B B 1.- Approach Movement of the probe in rapid (G00) from the point where the cycle is called to the first approach point, situated at a distance (B) from the first face to be probed. The approaching movement is made in two stages: 1st Movement in the main work plane. 2nd Movement along the longitudinal axis. 2.- Probing Movement of the probe along the abscissa axis at the indicated feedrate (F), until the probe signal is received. The maximum distance to be travelled in the probing movement is 2B. If, after travelling that distance, the CNC does not receive the probe signal, it will display the corresponding error code and stop the movement of the axes. 3.- Withdrawal Movement of the probe in rapid (G00) from the point where it probed to the first approach point Page 16 Chapter: 12 WORKING WITH A PROBE Section: OUTSIDE CORNER MEASURING
