Download Panasonic FP-X Programmable Controller User`s Manual

Transcript
10.3.7 Sample program (Pulse I/O Cassette)
Positioning operations with a single speed inverter
Wiring example
Operation chart
I/O allocation
I/O No.
Main X100
X102
unit
I/O
Y100
R100
R101
R102
R9118
Description
Encoder input
Operation start signal
Inverter operation signal
Positioning operation running
Positioning operation start
Positioning done pulse
High-speed counter CH8 control flag
Program
When X102 is turned on, Y100 turns on and the conveyor begins moving. When the elapsed value
(DT90332 and DT90333) reaches K5000, Y100 turns off and the conveyor stops.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]