Download MM2-LV-T Model Specifications - crsllc

Document Revision History
Date
Rev Letter
10/25/2012
C
Updates Made
Updated to include the following revisions for firmware version v10.6.6:
l
Added "About AES Encryption" on page 64 and information about setting
the encryption strength and encryption key. AES encryption is available
in MM2 models starting with firmware v10.6.6.
l
Removed all references to Ultra Low Power Mode, as this feature was
removed from this firmware version.
l
Updated Appendix A to include firmware v10.6.6.
09/14/2012
B
The illustration of the pin layout on page 76 has been updated to correctly
reflect that Pin 10 is closest to the edge of the board.
08/03/2012
A
This document replaces the MM2 Spread Spectrum Wireless Data
Transceiver User Manual.
The following content has been added or changed:
l
Power information on page 7.
l
Examples of how to use subnet IDs to route communication through your
network on page 42.
l
Working with parallel repeaters on page 61.
l
Index starting on page 91.
l
The MM2-LV-T models acceptable voltage has been updated to
+3.5 VDC (± 5%) throughout.
In addition, the organization of the document has been updated to address
content that applies to all networks, content that applies to MultiPoint
networks, and content that applies to Point-to-Point networks. Refer to the
Table of Contents.
LUM0014AB Rev C
v