Download Svantek - Supervisor Software Manual

Fig.2-5 The Manage instrument options / functions dialog box.
The State column, located at the right hand side of each option / function, contains the
‘Enabled’ label for unlocked options / functions, and the ‘Unlock’ button for the ones that
have not yet been unlocked. If you wish to unlock an option or function that you purchased,
press the ‘Unlock’ button and enter the unlocking code in the window that appears.
Note: If wrong code is entered three times since the instrument was last turned on, any later
attempt to lock or unlock an option will fail (regardless on whether the entered code is
correct or not) until the instrument is restarted.
Fig.2-6 Window allowing to enter code for unlocking an additional option or measurement function.
You can also lock again an unlocked option / function by clicking on its name with the right
mouse button, selecting ‘Lock’ and entering the same code that was used for unlocking.
In case of SV 104 instruments, the instrument’s name can be specified using the Edit name
command, available in the menu opened by clicking with the right mouse button on the row
of the Inventory table corresponding to the selected instrument (Fig.2-7).
© SVANTEK
-9-
Supervisor User Manual