Download Svantek - Supervisor Software Manual

Fig.4-49. The View Configurator.
4.4.1.
The View Configurator
USING THE VIEW CONFIGURATOR
To show / hide the View Configurator, use the
button, located on the panel’s toolbar. It
can also be hidden using the Hide button in the upper-right corner of the View Configurator
sub-panel.
The results and functions displayed in Plot, Table or Text modes are selected in the View
Configurator. Checking the control next to the name of a result / function adds it to the view.
If you check a branch containing more than one result / function, all the data inside the
selected branch will be displayed. If you select in this way more than 30 objects at once, you
will be asked for confirmation.
There are two other methods of selecting multiple objects simultaneously:
 Selecting an object with the CTRL button pressed will cause the selection of all available
objects of the same type, e.g. selecting the Time history MIN results in Profile 1 will also
cause the selection of Time history MIN results in other profiles, as well as Summary MIN
results in all profiles.
 Selecting one object, and then selecting another object in the same subtree with the
SHIFT button pressed will cause the selection of all objects in the subtree that are
displayed between the two objects.
These two methods are illustrated in Fig.4-50.
© SVANTEK
- 68 -
Supervisor User Manual