Download Inspur SA5212H2 User Manual

Chapter Nine Server Installation Guide
2. Clamp the inner rail at both sides of the server into the outer rail groove of the
cabinet (the sliding bead of the outer rail must be moved to the front end of the outer
rail).
3. Refer to (picture 8), keep the server horizontal and push it steadily into the
cabinet. If it is blocked during the pushing, pull forward the bayonet lock at the front of
the inner rail, and at the same time push it into the cabinet.
Picture 8
4. Use fixed screw (picture 7) to fix the server to the cabinet through the third hole
(picture 9) in the front of guide rail corresponding to angle rail.
▲ Special notice: if the third hole screw is accompanied with the cabinet front
panel, you may use the accompanying screw to fix the server to the cabinet in this
operation.
Picture 9
76