Download WireScope 350 User`s Guide

The Storage Setup screen describes the software version contained on the
inserted CompactFlash™ card and gives you the option of accepting or rejecting
the software upload. This screen also allows you to specify whether you wish to
upgrade other WireScope 350 units with this card.
If you specify that you would like to upgrade other WireScope 350s with the
CompactFlash™ card, then the WireScope 350 will not erase the software
upgrade files from the CompactFlash™ card after the upgrade is complete.
If you indicate that you do not wish to use the CompactFlash™ card to upgrade
other WireScope 350 units, the WireScope 350 will erase the CompactFlash™
card after loading the software upgrade in order to provide the maximum
possible space on the CompactFlash™ card for test results storage.
Press the Next button to continue with loading WireScope 350 software from
the CompactFlash™ card. After the software upload is complete, the
WireScope 350 will merge any test results stored in its internal flash memory
onto the CompactFlash™ card in order to prepare for storing subsequent test
results on the CompactFlash™ card.
Downloading autotest profiles from a CompactFlash™
card
The CompactFlash™ card is a convenient means for quickly downloading
autotest profiles. After downloading the profile using ScopeData Pro, insert the
CompactFlash™ card into the WireScope 350. The unit will detect the card and
prompt you to configure. Press Yes to continue. The Storage Setup screen
appears listing Spec database synchronization as the software update for your
WireScope.
The screen displays the question: Do you wish to use this CFlash card to update
other WireScopes?” Be sure to select Yes if that is your intent; otherwise, the
profile will be erased once the downloading is completed. Then, press Next.
Chapter 15
WireScope 350 System Settings 115