Download cifX Cards Real

Transcript
Installing Software
97/267
cifX Card with Slave Protocol
If on the cifX card a Real-Time Ethernet protocol or a fieldbus protocol with
Slave functionality is operated, the configuration and the diagnosis of the
cifX card are done with the program netX Configuration Tool or with
SYCON.net.
If you use the netX Configuration Tool, the following software
components are required:
• Configuration and diagnosis program netX Configuration Tool
• Device Driver (cifX Device Driver)
Figure 38: System Overview CIFX and netX Configuration Tool
cifX Cards Real-Time Ethernet | Installation, Operation and Hardware Description
DOC060501UM21EN | Revision 21 | English | 2010-07 | Released | Public
© Hilscher, 2006-2010