Download GT01 Technical Manual

Setup
GT series
3.1
Setup Procedure for the GT01
When the menu operation as shown at the left page is carried out, the configuration file
is sent to the GT01. During the transfer, a screen like that shown below is displayed.
GT01 Configuration
file being transferred
Screen transfer cable
(AFC8503)
(4) Setup is completed.
If the transfer has been completed without any problems, the setup is completed.
CAUTION
Backup of the GT01 Configuration file
The GT01 Configuration file is stored in the user memory (F - ROM) of the
GT01. This file is deleted if the memory is initialized using the command
on the system menu of the GT01 main unit (see page 56), and will have
to be transferred again.
23