No category

Download Multi Data Viewer Light

Transcript

2. Setting/Logging Tool: Setting Manager
Use the “Sensor Settings” window to make settings for the selected sensor.
The lower setting items vary depending on the sensor type.
button: Click this to update the parameters with the setting data read from a CSV file.
button: Click this to output the settings to a CSV file.
Click the "Read setting" button to read the set values to Setting Manager from the device to
update them.
Click the “Save settings” button to save the settings to the device.
Click the "OK" button to register the device with the settings made in the tab.
Clicking the "Cancel" button aborts the settings and closes the window.
The device must not be in the recording process when reading or writing the setting from/to
the device. Stop the recording in "Device operation" if the device is in the process of
recording.
(3) Deleting Devices
Click the "Delete" button to delete the connected devices selected () in the list.
2-21

Related documents