Download User Manual

Chapter 5: Managing DCR Users
2. Select the Admin menu and the View/Share FSP Groups submenu.
3. As seen in Figure 5-16.1, click on the Select link next to the partner to be shared
with another group of FSP DCR users.
4. As seen in Figure 5-16.1, click on the Add link that appears under the Assigned
Group(s) for the selected partner.
Figure 5-16.1
5. Select a group from the drop-down list which appears, and confirm the
selection.
Note: It will take approximately 5 minutes before the users of the shared group will be
able to access the partner’s data.
To maintain the highest level of data security, the shared group should be removed from each
partner as soon as the sharing is no longer necessary for business needs.
To Remove Sharing of a Partner’s Data with Another FSP DCR Group:
1. Follow the instructions in the previous section for “To Share a Partner’s Data
with an FSP DCR Group” steps 1 – 2.
FSP DCR User Manual
Page 77