Download User Control Language (UCL) Reference Manual

Dok.-Nr/Doc. No.:
Ausgabe/Issue:
STD–0010
Überarbtg./Rev.:
Seite/Page:
Daimler–Benz Aerospace
Raumfahrt-Infrastruktur
COL–RIBRE–
4
–
II
Datum/Date : 13.03.1998
Datum/Date:
von/of
XI
Data/Document Change Record
Revision
Date
Affected Section/Paragraph/Page
Reason for Change/Brief Description of Change
5.1.6.4
12. Create procedure GET_ENG_DATA
5.1.7
13. Delete Event Handling
5.1.8.3
14. Create SEND_PDU procedure for special
packets.
15. Modify parameter list of following procedures :
3/A
5.1.3.1, 5.1.3.2
EXECUTE_FLAP, EXECWAIT_FLAP
5.1.8.x
CCSDS packet control
5.1.9.1
SEND_MESSAGE
5.1.3.3, 5.1.3.4, 5.1.3.8
SUSPEND_/RESUME_/ABORT_FLAP
5.1.5.1, 5.1.5.2
ISSUE_DISCRETE, SEND_SERIAL
04–04–95
DDR–ECOL–0044, Issue 1 incorporated;
5.1
3/A
remove ”V3” notes from Type Definitions
04–04–95
COL–RIBRE–DDR–0472,
Issue 1, Revision A incorporated :
5.2
1. Create new types and constants needed
for revised procedures.
2. Delete procedures :
CLOSE_URT, OPEN_URT,
READ_RAW_DATA,‘
READ_RESULT_FROM_URT, RESUME_SMT,
SET_OFFLINE, SET_ONLINE,
WRITE_RESULT_TO_URT
3. Update description of procedures :
5.2.1.3, 5.2.1.4, 5.2.1.5
SET_XXXX_LIMIT
5.2.1.3, 5.2.1.4, 5.2.1.5
SET_EXCEPTION_COUNT,
SET_EXPECTED_STATE,
SET_EXPECTED_VALUE
5.2.1.9, 5.2.2.4
SET_LIMIT_SET, START_SMT
5.2.3.1, 5.2.4, 5.2.5
EXECUTE_FLAP,
ISSUE
5.2.5.4, 5.2.7.2, 5.2.12.1
4. Add procedures :
LOAD_APPLICATION,
DOWNLOAD, USER_EVENT, LOAD_UCL
5.2.13.1, 5.2.13.2, 5.2.13.3
EXECUTE_FLAP, EXECWAIT_FLAP,
ISSUE_SW_COMMAND
Daimler–Benz Aerospace AG, D–28199 Bremen – All Rights reserved – Copyright per DIN 34