Download Microlink 770 Manual

Transcript
Microlink 770 Manual
For Streamer you should set those channels you want to include in
the scan to input, and those you don’t want readings from to neither
input nor output—thus disabling the channels.
Setting the Range
The range of the measurement channel you have selected is
shown in the Input Range / Mode box. Select the smallest range that
encompasses your signals. (Small ranges are generally more accurate
than large ones.) When using Streamer don’t select auto-ranging as
this is too slow.
The Settling Time
When using Streamer software, the settling time for the analogue
channel is replaced by channel interval settings in the clock options
(Section 4.2.4).
The Alarms Button
Streamer is optimised for high speeds and so doesn’t support
alarms.
Maximising Streaming Speed
1. Disable unused channels (Section 4.2.3).
2. Turn off auto-ranging (Section 3.4.24.2.3).
4.4Using Windmill with Microlink 770 Hardware