Download Microlink 770 Manual
Transcript
Microlink 770 Manual For Streamer you should set those channels you want to include in the scan to input, and those you don’t want readings from to neither input nor output—thus disabling the channels. Setting the Range The range of the measurement channel you have selected is shown in the Input Range / Mode box. Select the smallest range that encompasses your signals. (Small ranges are generally more accurate than large ones.) When using Streamer don’t select auto-ranging as this is too slow. The Settling Time When using Streamer software, the settling time for the analogue channel is replaced by channel interval settings in the clock options (Section 4.2.4). The Alarms Button Streamer is optimised for high speeds and so doesn’t support alarms. Maximising Streaming Speed 1. Disable unused channels (Section 4.2.3). 2. Turn off auto-ranging (Section 3.4.24.2.3). 4.4Using Windmill with Microlink 770 Hardware