Download Instruction Manual

-8-
3.2.9 Cycle Mark Button [*]
Under the state of chase program edit, the key set auto-cycle mark. When chase program running to
have cycle mark of step, it can be auto return the first program step and re-running. The key and [MUSIC]
button can be together user.
3.2.10 [FLASH] Button, [LATCH] Button, S-[LATCH] Button
Each function buttons can be auto-set lock control mode of number key: ([FLASH] dot-shake,
[LATCH] self-lock, [S-LATCH] mutual lock).
Press [FLASH] dot-shake, the liquid crystal of top right corner will display F, the number key located
dot-shake control mode. That is press it output, release it have not output. The mode can be press multi
number key and output multi scene or chase program simultaneously.
Press [LATCH] button, the liquid crystal of top right corner will display L, the number key located
self-lock control mode. If press number key, self-lock, release it continue preserve, and output endue with
the key of scene or chase program; press the next key, the key reset and stop output. The mode can be press
multi number key and output multi scene or chase program simultaneously.
Press [S-LATCH] Key, the liquid crystal of top right corner will display S, the number key located
self-lock control mode. Under the state of mode, press number key release the other key excepting lock the
[S-LATCH] button, so, it can be only output 1 scene or chase program.
3.2.11 [4], [3] Button
Both [4] and [3] key have multi purpose.
During running the chase program, can be change chase program of direction, that is program foot
adopt increase or decrease running, on the liquid crystal screen of the second line right display and execute
of lighting direction sign.
Edit chase program in order to change program step.
3.2.12 [C], [P] Button
When edit scene, it can be user above two keys carry out scene copy and paste. One of [C] key COPY
and [FLASH] key can be user together, the other [P] key PASTE and [LATCH] key can be user together
3.2.13 [CROSS MODE] Scene Filtrate Mode Button
User select whole channel date smooth transition or only have X/Y scan channel data smooth
transition.
3.3 Handspike, Control Rocker Part
246-III console has 15 bars handspike. Handspike push up, the control value will increase; handspike
below, the control value will decrease.
3.3.1 Handspike Group
246-III console has 1 group series of tactic 12 scroll bar. Which have two functions as follow:
l Press SCAN area function key, the scroll bar control scanner 1-12 channels of control value. And it
was each named CH1, CH2…CH12.
l
Press LIGHT area function key, the scroll bar also was named SUB1, SUB2…SUB12, and control
DMX channel 235-246 (12 channels) dimmers control.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn