Download Welding Control Unit TE-600

WELDING CONTROL UNIT TE 600
The TE600 is a microprocessor-based welding control unit for resistance welders in inverter technology.
The task of the welding control unit is to manage the welder's components, in particular the IGBT power
booster unit, which regulates the welding current. It is possible to store up to 63 different welding
programs, all of which can be directly recalled from an external device. Each program comprises 22
programmable parameters that describe the work cycle. In addition to the basic 4-stage welding cycle,
the control unit allows the running of welding processes with pre-welding current, post-welding current,
slopes and pulses. The TE600 works in constant current mode, it visualizes the weld current and
controls the current supplied with settable limits.
2
1
2
3
4
MADE IN ITALY
MAIN TECHNICAL DATA
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Simplified programming by 6 keys and alphanumeric LCD.
Inverter command with IGBT at medium frequency 1000 Hz.
Storage of 63 welding programs, all of which are recallable from PLC, PC, etc.
22 programmable parameters for each program.
Stepper function for compensating the electrodes’ wears with programmable curve.
Weld times adjustable in 1ms increments.
Visualization of the welding current in kA and limits of the welding current.
Automatic double stroke function (for the applicable welders).
Proportional valve for controlling the welding pressure.
Welds-performed counter.
Single and automatic cycle.
WELD / NO WELD function.
Control of 4 solenoid valves 24 Vdc Max. 7.2 W with output protected against short circuit.
Welding current limits with output for signalling out-of-limits welds.
Outputs for interfacing with external devices (Interlock/End cycle).
Automatic voltage compensation.
Five languages can be selected.
Possibility of updating the control unit hardware.
4 / 42