Download Relay™ User Manual

A.3
Relay NMO to TNC Adapter Cable (01019372)
The Relay NMO to TNC Adapter cable (refer to Figure 22, Relay NMO to TNC Adapter Cable), connects the
Relay to the external radio antenna. This cable is used when the radio antenna is mounted on the top of the
Relay.
This cable is RoHS compliant.
Figure 22: Relay NMO to TNC Adapter Cable
150 ±10
P1
P2
Dimensions are in millimeters

To avoid possible GNSS performance degradation, do not mount the antenna on the top of the
Relay when the module is operated as a base station.

To ensure the overall antenna system gain complies with the radio specific FCC requirements,
the NMO to TNC Adapter Cable is only used when approved by a professional installer for use
in combination with a designated antenna.
Refer to Cellular Radios on page 10 for additional guidance.
Relay User Manual Rev 1
65