Download Delta User`s Manual

Delta User’s Manual
266
_
Commands to Control Horizontal Position
of Print Head
-
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
Return print head to home
riage Return).
This command returns the print head to the
home position (the left margin). If DIP switch
2-4has been set on, then this command will
also cause a line feed character to be generated after the carriage return, thereby advancing to the beginning of the next print line
automatically.
PURPOSE:
Set the left print margin.
REFERENCE:
-
Chapter 4
REMARKS:
(Car-
(CR)
13
OD
REFERENCE:
CODE:
(decimal ASCII)
(hex ASCII)
position
(ESC)
27
1B
“M”
77
4D
-
-
n
n
n
This command sets the home position returned to during the execution of all subsequent carriage returns to be print position n.
The power on default for n is 1. The value of n
must be between 1 and 255. For Delta-10 the
maximum print position for pica pitch is 80,
for elite is 96, and for condensed pitch is 136. For Delta-15 the maximum print position for
pica pitch is 136, for elite is 163, and for condensed pitch is 233.
-
-
-
Chapter 5
-