Download Point Manager Manual

‘CC’ – Configure/Read Clock
Command Options
CC<S[F|S]|R>
SF – clear the Historical and Event Logs and set the Point Manager clock
SS – synchronize the Point Manager clock
S – set the Point Manager clock
R – read the current clock setting
Command/Response Syntax
Parameters
Command:
Response:
Command:
Response:
Command:
Response:
Command:
Response:
CCSmmddyyhhnnss
CCSmmddyyhhnnss
CCSFmmddyyhhnnss
CCSFmmddyyhhnnss
CCSSmmddyyhhnnss
CCSSmmddyyhhnnss
CCR
CCR,mmddyyhhnnss,syncflag
Where:
mmddyyhhnnss – date and time to set the clock or the date and time of the read
clock
syncflag – Has the Point Manager been syncronized with an SNTP service? “T”
– yes, the clock has been updated ; “F”- either SNTP is not being used,
there was a failure to get time from the SNTP service, or cannot set clock
because too much difference in time.
Login Level
Point Manager Manual
Login Level:
CCS – Configure
CCSF – Configure
CCSS – Configure
CCR – Data
Commands • 73