Download I-Site Manual - version 2

Section 6 : Preparing the Readout for Use
Before embarking on a visit to site to take a series of readings it is important to ensure that the
readout is properly prepared as follows;
1. Ensure that all items are available i.e. Readout, pneumatic flyleads, cleaning materials for
cleaning couplings and notepad/pencil for recording readings.
2. The internal Nitrogen cylinders must be sufficiently charged to ensure enough gas is
available for the readings to be taken (refer to Section 7 for charging details). In case of
high pressure readings greater quantity of gas per reading will be consumed. A careful
planning of recharging the gas cylinders is advised to save trips back to base especially
over long distances.
User Manual
8