Download User`s Manual

-
Memory Points: Set the number of points to be saved in the scope memory, when
Save function is activated. The number of points varies between 100 to 2000 points.
-
A/D Rate: Set the acquisition data rate. The range is from 500Hz to 4,000KHz and is
determined automatically according to your computer speed.
FFT Function
The FFT mode can be reached by pressing the Hold button and followed by
selecting either X or Y buttons. A graphical display of Position (X or Y) or of
power at each frequency is shown. This data is obtained by performing a Fast
Fourier Transform (FFT) on the data in the SCOPE mode. The vertical scale
is automatically selected and is not adjustable. The horizontal (frequency)
scale can be varied and shifted. Within the graphical area, the value of the DC
or zero Hertz component is displayed. The box labeled Data FFT denotes the
Frequency (horizontal) and Amplitude (vertical) locations of the Cursor.
Clicking and dragging with the mouse pointer changes the position of the
cursor.
OBP Series - USB Version
61