Download English-PDF - SI Analytics
Transcript
SCHOTT INSTRUMENTS Uvi Light - Changing the Y axis Press F2 (Y axis). Choose a linear or logarithmic axis for absorbances or a calibrated axis in 1/Abs or Logit. Press F1 (Lin.): Linear axis for absorbances. Press F2 (Log.): Logarithmic axis for absorbances. Press F3 (1/Y): reverse of absorbance. Press F4 (Logit): See explanation in this chapter, page 80 Example: X-axis = Lin. Y-axis=1/Y Type = Linear - Changing the type of curve Press F3 (Type). Choose among 4 types of curves Press F1 (Linear): line segments. Press F2 (Spline): spline curve. Press F3 (Regression.): linear regression curve. Press F4 (Regression.(0)): linear regression going through the origin. See explanation of different types of curve in this chapter, page 81 Example: -56- Zero point not used XTD