Download English-PDF - SI Analytics

Transcript
SCHOTT INSTRUMENTS
Uvi Light
- Changing the Y axis
Press F2 (Y axis).
Choose a linear or logarithmic axis for absorbances or a calibrated axis in 1/Abs or Logit.
Press F1 (Lin.): Linear axis for absorbances.
Press F2 (Log.): Logarithmic axis for absorbances.
Press F3 (1/Y): reverse of absorbance.
Press F4 (Logit): See explanation in this chapter, page 80
Example:
X-axis = Lin.
Y-axis=1/Y
Type = Linear
- Changing the type of curve
Press F3 (Type).
Choose among 4 types of curves
Press F1 (Linear): line segments.
Press F2 (Spline): spline curve.
Press F3 (Regression.): linear regression curve.
Press F4 (Regression.(0)): linear regression going through the origin.
See explanation of different types of curve in this chapter, page 81
Example:
-56-
Zero point not used
XTD