Download T-BERD® 950 User`s Guide

Test Results
Chapter 9 — Frame Relay Option
151
Table 41 • Frame Relay Test Type Results (Continued)
Result Name
Description
DLCIs
Displays all configured DLCIs (Data Link Connection
Identifiers) for a circuit, indicating the status of the DLCI as
provided by the Full Status Poll. Deleted DLCIs apply to LMI
Rev. 1 only. A status of “traffic” indicates that traffic was
detected on the DLCI, but that DLCI was not listed in the Full
Status Poll.
NOTE: This result appears on the Large Graphical Display
Results view.
Lost Pings
Counts echo packets that were not replied to (includes out of
order echo reply packets and corrupted echo reply packets).
NOTE: This result is only available in TERMINATE mode.
Tx Pings
(Transmitted Pings)
Counts echo packets/frames transmitted by the analyzer since
the start of the test.
NOTE: This result is only available in TERMINATE mode.
Echo Pings
Counts echo replys transmitted by the analyzer since the start
of the test.
NOTE: This result is only available in TERMINATE mode.
Performance Category Results
Performance category results are described in Table 42.
In the following table, the letter in brackets following the
Result Name indicates that the result applies to both [B], a
single DLCI, and the aggregate total of all frame relay
packets received.
T-B E RD 95 0 U s e r’s M an ua l