Download - Columbia Machine

MODEL PSC300 CUBER
• Side Pusher Slow Position When Running Reverse: This Value is used by the controller to
calculate when the pusher will start slow before reaching the reverse stop position. The pusher
always returns to (0) when running reverse. The value entered will start slow when the side
pusher position is less than this value.
• Side Pusher Used as a Guide [on-off]: The side pusher can be used as a guide when the layer
pusher is moving the layer onto the hoist plate. This function is commonly used when the
machine is interlocking retaining wall for handling odd shapes.
• Side Pusher Guide Position For layer Pusher: This value is the stop position for the side
pusher when used as a guide for the layer pusher. Note: when adjusting this position be care
full not to set value too high to prevent the layer pusher from catching the side pusher blade.
• Side Pusher Maximum Forward Position: This value is the maximum value the side pusher
is allowed to move when traveling forward. This value is used in manual and Automatic
operation. If there is any problem with the encoder on the side pusher this value may be used
to override the forward operation to help correct the problem with the counter.
Page 21