Download SIMetrix User`s Manual

Chapter 5 Parts
would see if selecting NMOS Power FET
2.
Note that this is not the entire list of available parts of the desired type; only parts
for which a specification is available will be listed. However, there should be a
representative range so that it should be possible to find a model suitable for
initial development work.
To filter listed parts to include your desired spec, use the drop-down boxes at the
bottom of the box in the Filter group. Note that the upper end of each range is
exclusive. So for example, ‘100-500’ means everything from and including 100
up to but not including 500.
3.
Once you have selected your model, click Ok to place in the usual way.
Viewing and Editing Models
All parts selected using the model library browser as described above are defined using
a model located in the global model library. You can view this model using the right
click popup menu View/Edit Model... . This will display something like the following
dialog box:
125