Download TI-89 - Cengage Learning
Transcript
Technology Tip: If your program uses one-letter variables such as, a, b, c, or d, note that any previous values for these variables, including matrices, will be replaced by the values used by the program. The TI-89 does not distinguish between A and a in these uses. Note that you will have to clear the variables (using 2nd VAR-LINK) in order to use these names again in the current folder. From the home screen, press F4 [Other] alpha B [NewFold] and type the name of the new folder. The work you do from that point on will be in the new folder, as indicated by the folder name in the lower left corner of the status line. You can change folders from the MODE menu or, from the home screen, by typing setFold( foldername), where foldername is the existing folder that you wish to be in. IV.10.2 Executing a Program: To execute a program you entered, go to the home screen and type the name of the program, including the parentheses and then press ENTER to execute it. If you have forgotten its name, press 2nd VAR-LINK to list all the variables that exist. The programs will have PRGM after the name. You can execute the program from this screen by highlighting the name and then pressing ENTER. The screen will return to the home screen and you will have to enter the closing parenthesis ) and press ENTER to execute the program. If you need to interrupt a program during execution, press ON. The instruction manual for your TI-89 gives detailed information about programming. Refer to it to learn more about programming and how to use other features of your calculator. IV-40 Copyright © by Houghton Mifflin Company. All rights reserved. TI-89 Graphics Calculator