Download PB22 | PB32 - Intermec Developers Forum

Chapter 2 — Configuring the PB22 and PB32
run “dlk -z”
The printer’s display will read “Upgrading”.
6 In the communications program window, click Transfer > Send
File. A dialog box will appear.
7 In the protocol drop-down box, choose Zmodem.
8 Browse to the firmware (.bin) file you want to upgrade to and
select it.
Wait approximately five minutes for the firmware upgrade to
complete. When the upgrade is complete, the communications
program window will display “kernal flashing ok.” The printer will
automatically reboot.
To upgrade the printer firmware using a communications program
window and ESC/P
1 Connect your printer to your PC using a serial cable. For help, see
“Connecting the Printer Through the Serial Port” on page 29.
2 Download the firmware (.bin) file you want to upgrade to a
location on your PC.
a Go to www.intermec.com.
b Click Support > Downloads.
c
Use the Product Category, Product Family, and Product
fields, to select the printer model.
d Click Submit. The latest available software appears on the
page.
e Download the latest firmware version to your PC.
f
Extract the .zip file to a folder on your PC.
3 Open a communications program.
4 Reboot the printer.
5 Press the Esc key and in the communications program window
type :
{SYS:USH}
6 Type :
su -pass admin.
50
PB22 and PB32 Mobile Label and Receipt Printer User’s Guide