1
Download TMD710 V4 Programmer Help
Transcript
128 TMD710 V4 Programmer Help Note: Be sure to configure the squelch to an appropriate level for both the VHF and UHF band on the Commander and Transporter. If the squelch is not set to an appropriate level, the transceivers may enter a BUSY state due to noise signals and be unable to transmit. When in SKY COMMAND mode, the mic keys of the Commander will function as shown below. TM-D710 Settings COM Port Speed - adjust the speed at which the computer and transceiver exchange data when the transceiver is connected to your computer. Display Contrast - Display visibility changes depending on variable conditions such as lighting conditions between night and daytime, as well as temperature. Use this function to select the best visual contrast. Display Reverse Mode - change the display status (backlight color) to Negative or Positive. © 2013 RT Systems, Inc.
