Download TMD710 V4 Programmer Help

250
TMD710 V4 Programmer Help
steps shown on this screen. Generally, they are different from the Get Data
from radio steps.
Radio Issues
"Error" is displayed on the radio.
"Behind the scenes" information about the radio does not match that of a factory
radio. This is most common when a radio has been modified.
1. Create a new file (Ctrl M or File|New)
2. Execute Communications | Get data from Radio. This is the only way this
"behind the scenes" information can be obtained for your radio.
3. When this is completed successfully, return to your file.
4. Execute Communications | Send data to Radio begin careful to follow
these steps since they are different from the Get Data from radio steps.
The radio does not change when "OK" clicked on the screen in the
programmer (never indicates receive).
There is no communication between the radio and the computer. Check through
the Cable issues to be sure you are using the right cable and that it is connected
properly to the radio and to the computer.
The radio never goes to CLONE.
On many radios you hold buttons during power on to access a startup menu. Once
you select the clone option of the menu (the radio is NOT YET IN CLONE MODE).
You press a key to accept the CLONE option. When you press the button to
access the startup menu option, the radio does not change.
1. The keys on the radio may be locked. Turn the radio off then back on in
normal mode to check for a lock symbol on the screen. If the keys are
locked, unlock them. Once unlocked, power off the radio and begin the
Communications process again.
2. The key specified is "touchy" and responds if it is touched just the right way.
This has been the case on several of the mobile radios. Try again with a
shorter or longer touch on the button. When you get that touch just right, the
radio will respond.
© 2013 RT Systems, Inc.