Download TMD710 V4 Programmer Help

Programming Memory Channels
9.4
95
Home (Call) Channel
The Call channel memory provides convenient, one-touch access to your most often
used frequency in the 2M and 440 MHz bands.
Call/Home channel memories are programmed on the Home tab of the Programmer.
The information to be programmed for the Call Channels is the same as that for the
regular Memories. See Regular Memory Channels for the details of each item to be
programmed.
Call Scan
Use Call Scan to monitor both the Call channel for the active band and the currently
selected VFO frequency or the currently selected Memory channel.
To use this function
Select a Memory channel or VFO frequency.
Press CALL for 1 second to start Call scan. - The MHz decimal blinks to
indicate the scan is in progress.
Press CALL again to quit scanning.
Note: If your radio seems to "run off" from the channel or frequency
check that this feature is not engaged. You may have set it
accidentally by holding the CALL button a little too long.
© 2013 RT Systems, Inc.