Download SigmaSystemCenter 3.1 Configuration Guide

4 Registering Resources to SigmaSystemCenter
4.2.2.
Adding XenServer Pool Master as a Subsystem
To add XenServer Pool Master as a subsystem, perform the following procedure. If you
add XenServer Pool Master as a subsystem, XenServers that are registered to
XenServer Pool Master are added as subsystems automatically.
1.
Display Add Subsystem window.
2.
Select Citrix XenServer Pool Master in the Subsystem Type list.
3.
In the Host Name box, enter a host name or IP address of the server which is
configured as XenServer Pool Master. Or enter the URL of XenServer Pool Master
in the URL box.
Note:
▪ Ensure that either of the Host Name box or the URL box is entered.
▪ Do not add a XenServer other than the XenServer Pool Master.
4.
In the Port box, enter the port number with which SystemProvisioning accesses to
XenServer Pool Master. If you omit entering the port number, the default port
number is registered.
Note: The default port number is "443".
5.
In the User box, enter the user name of XenServer Pool Master.
6.
In the Password box, enter the password for XenServer Pool Master.
7.
Click OK.
8.
The added XenServer Pool Master appears under Subsystem List.
SigmaSystemCenter 3.1 Configuration Guide
134