1
Download SigmaSystemCenter 3.1 Configuration Guide
Transcript
4 Registering Resources to SigmaSystemCenter 4.4.6. 5. The Add Private VLAN dialog box appears. 6. Enter the primary ID in the PrimaryId box. 7. Enter the secondary ID in the SecondaryId box. 8. Select a VLAN type in the VLAN Type list. 9. Click OK. Adding a Logical Network If a logical network is registered to an operation group, the following setting can be configured: When the system configuration is changed, the ports can be added to and deleted from VLAN automatically to reflect the changes. The information of the virtual switch and port group that are required for creating a virtual machine can be configured. The Address Pool to be required for automatic IP addressing can be configured. It is also possible to set only the address pool to the logical network. To add a logical network, perform the following procedure: 1. Click Resource on the Title bar to switch to the Resource view. 2. Click the Network in the Resource tree. 3. Logical Network List appears on the Main Window. 4. Click Add Network on the Configuration menu. SigmaSystemCenter 3.1 Configuration Guide 146
