Download Revision - Banner Engineering

iVu Plus BCR Gen2 Series Sensor
For C-Mount Models Only:
1. Remove the Lens Enclosure.
2. Adjust focus while monitoring the focus number. To ensure the best image, adjust the focus until the Focus
Number peaks.
3. Replace the Lens Enclosure on the camera.
C-Mount Models
C
E
B
D
C
A
C-Mount Lens
B
Lens Enclosure
C
Retainer Ring (optional)
D
Filter (optional)
E
Filter Retainer Ring Tool
NOTE: Filter Kits are available separately.
A
Setting Up a Barcode Application
This section describes how to set up the iVu Plus BCR sensor.
1. Go to Main Menu > Inspection > Barcode > Barcode Type to select one or more Barcode Types from the list.
NOTE: To ensure optimal performance, select only the barcode types for your application. For
example, if you use only one of the of the barcode types listed for All Linear, uncheck the box
next to All Linear, and select a radio button next to the desired linear barcode type. If you use
only DataMatrix, uncheck all the boxes except the one next to DataMatrix.
2. Go to Main Menu > Inspection > Barcode > Barcode Count to select the number of barcodes (1 to 10) to be
read at one time.
6
www.bannerengineering.com - tel: 763-544-3164
P/N 178443 Rev. A