Download Axe-Fx Firmware Release Notes

Improved Spring Reverb models. To utilize the new models the Type must be
reselected in order to load the new default parameters.
Fixed UltraRes indication bit not being set for Axe-Edit.
Fixed unit pushing MIDI data to USB even after USB has been disconnected
resulting in hang.
Fixed Metronome silent when switched on via MIDI CC until Tempo menu entered.
Fixed wrong capacitor value in Dirty Shirley model.
Fixed wrong phase inverter gain in Double Verb model.
Fixed Boost/Pad only working for Output 2 if using FX Loop (was not working
properly if using Output 2 Echo feature).
Various addition/fixes to support the Axe-Fx II XL.
*******************************************************************************
13.07
Fixed Global Tempo not sticking for presets created with prior firmware.
*******************************************************************************
13.06
Added remote monitoring of IR Capture state via MIDI (for CabLab use).
Added “Bright” control to Amp block. This high treble control is a shelving
filter between the preamp and power amp and may be used to darken or brighten
the output of the preamp. This control also accurately replicates the
“Presence” control found in the Mesa Triaxis preamp when set to negative values
(the Presence control in the Triaxis is actually a high frequency cut shelving
filter). Note: this is not to be confused with the “Bright Switch” which
engages/disengages a capacitor across the drive pot.
*******************************************************************************
13.05
Fixed LFO2 Parameter List menu values colliding with parameters.
Fixed unit becomes unresponsive when receiving MIDI PC messages along with MIDI
clock messages from OS-X.
*******************************************************************************
13.04
Fixed LFO-B incorrect in certain waveforms.