Download Axe-Fx Firmware Release Notes
Transcript
Added AC voltage control to Amp block. This parameter, called “AC Voltage (Variac)” in the Advanced menu sets the relative AC line voltage into the amp simulation implementing a virtual “Variac”. Note that normally the volume would vary with the Variac setting in a real amp but the simulation compensates for the volume change by applying the inverse. This mitigates having to manually compensate using the Output Level. Improved Noise Gate. The noise gate now features two types: “Classic” and “Intelligent”. The Classic type is unchanged from previous firmwares and is a basic downward expander. The Intelligent type features faster and more stable gating along with a proprietary noise reduction algorithm. Added ducking to Reverb block. the Delay block. The ducking works analogously to the ducking in Added “Class-A 30W Hot” amp model based on a Vox AC30HW with the Hot/Cool switch in the Hot position. Moved Spkr Drive parameter in Amp block to Advanced menu page. Fixed Angle Severe models oscillating if Presence turned way down. Fixed wrong Low Cut Freq in AC-20 Dlx Treb model. Fixed several errors in the Citrus Terrier amp model. Fixed Global menu Reverb Mix value display being overwritten. ******************************************************************************* 16.01 Improved Drive block algorithms for types based on the Tube Screamer. Fixed thumping when switching amp types. Fixed crackling when running two instances of the same amp. ******************************************************************************* 16.00 Improved Amp block cathode follower model. New model includes effects of grid resistance which results in more accurate clipping characteristics. Improved Amp block virtual power tube model. Improved algorithm more accurately models plate current vs. grid voltage yielding a more accurate transfer function which results in more pleasing power amp distortion and improved feel. Improved Amp block virtual power tube interaction with virtual output transformer. This yields improved low-frequency accuracy and feel. Furthermore this improves the output waveform accuracy resulting in much improved interaction with the cabinet block. IRs should now sound fuller and more resonant with more “thunk” and “knock”. The Low Res parameter in the Spkr tab can be used to increase or decrease the amount of knock.