1
Download Multilin - ElectricalManuals.net
Transcript
SETTING UP THE 10/100BASET CONNECTION CHAPTER 6: TOTAL WEB SOLUTIONS Z Install the new software. Z Connect to a meter via serial port and retrieve its Device Profile. Z Under Communications > Advanced Settings (for network card) > Services & Security, check the box for Block password protected access to device with address 1. Z Press OK > OK to return to the main screen, and press the Update Device button. Z Go to menu bar Tools > Password > Enable/Disable to enable password protection for the meter. In the meter’s /diag_modbus_tcp_server.htm web page, you should see: Block set password to meter: Enabled 6.5.3 Computer Name / DNS Z Click the Computer Name / DNS tab. Z Enter the Computer Name. Z Enter the IP Addresses for Domain Name Servers 1 and 2. Z Click OK to save settings. 6–14 GE COMMUNICATOR EXT – INSTRUCTION MANUAL
