Download Multilin - ElectricalManuals.net

CHAPTER 6: TOTAL WEB SOLUTIONS
UPDATE NETWORK CARD FIRMWARE FROM GE COMMUNICATOR EXT
Z Click on Retrieve Settings to retrieve the network settings used to
download Flash Files for updating the network option board via
TFTP. (The Initial Settings appear in the settings windows.)
Z In the text boxes provided, enter the name of the Runtime Update
File and/or Boot Update File.
Check with your Network Administrator and make any changes
necessary to the network settings.
Note
These changes facilitate file transfers while in Boot Mode; there is no permanent change.
Click on Write Settings to send the updated settings to the Meter. A screen will ask, “Are
you sure you want to Update the Flash File Settings?” Click Yes to update. The sub-window
will display “Write Completed”.
Z Start up a TFTP server on your computer.
Z Set the default file path for the TFTP server to the location of the
Runtime/Boot Flash file location (TFTP server software is available
from GE.)
See Appendix D for more information on TFTP.).
Z To update Runtime/Boot, click on Update Runtime or Update
Boot.
Z Click Yes to verify that you would like to update the Runtime/Boot
firmware.
After the update is completed, the message Update Completed
will appear in the sub-window.
Z To Change the Username and Password, type in the Current
Username and Password, then the New Username and Password.
GE COMMUNICATOR EXT – INSTRUCTION MANUAL
6–47