1
Download Multilin - ElectricalManuals.net
Transcript
PROGRAMMING AND RUNNING LOGS 8.2 CHAPTER 8: VIEWING LOGS Programming and Running Logs Program the following parameters specific to each type of log in the meter’s Device Profile. See Chapter 3 (9450/9650), Chapter 4 (9800) or Chapter 5 (7000) for details. Note Any time you update the Device Profile, a pop-up screen will announce that the logs are not being reset and asks if you would like to reset them. Resetting the logs is recommended if you make changes to CT & PT Ratios, Limits or Limit Full Scales. • Limit and Waveform Full Scales • Limits • Trending Setup • Trending Log Time Intervals • Power Quality and Waveform Thresholds • Labels — YOU MUST LABEL THE METER You do not need to start the logs; the meter is always recording. To confirm the parameters and track the progress of the logs, Z Select Statistics from the Logs menu (or click on the Log Status icon on the Tool Bar). The Log Statistics screen appears. 8–4 GE COMMUNICATOR EXT – INSTRUCTION MANUAL
