Download EyeLink System Documentation

Figure 4-2 Desktop Mount Camera Adjustment
Follow the steps below to mount the high-speed camera for monocular tracking or to
use the EyeLink Remote – the Camera Level position (see Figure 4-3):
1. Place the Desktop Mount on the table. Turn the 35 mm camera lens into the
thread on the camera. See Table 1 for recommended lens usage.
2. Move the camera screw to the top end of the slot.
3. Hold the camera with its elongation parallel to the table (and level with the top
of the mount), align the hole on the camera to the camera screw on desktop
mount, and then tighten the camera screw.
Figure 4-3 Camera Level Position for Remote and
Stabilized Monocular Recording
Desktop Mount / EyeLink Remote Installation
© 2005-2008 SR Research Ltd.
15