1
Download Thermo iPCM12-Rev 2
Transcript
Operating Instructions Recount Required Alarm Result Issue: 2.0 If the user moves out of position during the measurement cycle, the count is halted and the user is prompted to move back into position. The following “Recount Required” message displays. If the user moves back into position, then the count resumes. If the user leaves the portal, then the measurement is abandoned. See Alarms (page 5-19) and Alarm Display (page 5-106) for more information regarding the Alarm displays. If the measurement is partially complete and the α Low Background Limit is exceeded or when Quick Scan indicates realdirty, the "Contaminated" message displays, indicating that contamination is present. See Voice Prompts (page 5-85) for information regarding verbal instructions. This message is user-definable. See Messages (page 5-25) for more information. See Cancel Alarm (page 5-108) for more information on clearing the alarms. 5-104 iPCM12 Installed Personnel Contamination Monitor Thermo Fisher Scientific
