Download PDF Part I

MOUNT
Keyword
Description
SECURITY
Allows you to continue mounting a volume if an error is returned
because the volume has an invalid SECURITY.SYS file. You must have
the user privilege VOLPRO or own the volume to use this keyword.
For magnetic tapes only. Prevents MOUNT from checking the file-set
identifier in the first file header label of the first file on a continuation
volume. Use this keyword only for ANSI-labeled volumes on which
the file-set identifier of the first file on a continuation volume differs
from the file-set identifier of the first file of the first volume that was
mounted.
Allows you to override the write protection of former shadow set
members. Applicable only if you have the volume shadowing option.
Refer to Volume Shadowing for OpenVMS.
When you mount a volume with this qualifier, the volume shadowing
generation number is erased. If you attempt to remount the volume in a
shadow set, the volume is considered an unrelated volume and receives
a full copy operation from a current shadow set member.
SETID
SHADOW_
MEMBERSHIP
The following command overrides the volume identification field, thus mounting a
magnetic tape on MFA0 without a label specification:
$ MOUNT/OVERRIDE=IDENTIFICATION MFA0:
/OWNER_UIC=uic
Requests that the specified UIC be assigned ownership of the volume while it is
mounted, overriding the ownership recorded on the volume. If you are mounting
a volume using the /FOREIGN qualifier, requests an owner UIC other than your
current UIC.
The parameter, uic, specifies the user identification code (UIC) in the following
format:
[group,member]
You must use brackets in the UIC specification. The group number is an octal
number in the range 0 to 37776; the member number is an octal number in the
range 0 to 177776.
To use the /OWNER_UIC qualifier for a Files-11 volume, you must have the user
privilege VOLPRO, or your UIC must match the UIC written on the volume.
Example
The following command mounts a disk device labeled WORK on DRA3 and
assigns an owner UIC of [016,360]:
$ MOUNT/OWNER_UIC=[016,360] DRA3: WORK
/POLICY=[NO]MINICOPY[=(OPTIONAL)], REQUIRE_MEMBERS, [NO]VERIFY_
LABEL
Controls the setup and use of shadow sets.
The following table lists the keywords for this qualifier:
DCLI–476