Download Wireless Sensor Tag System
Transcript
iOS App User Manual Install our iPhone/iPad app from AppStore by searching "Wireless Tag List". Use the 12 digit serial numbers on your Ethernet Tag Manager to create a login. Keep the serial number in a safe place. Fill in the serial number Tap "Create" button in the "Create a login to access Tag In the login screen, tap (case insensitive), login upper right corner to create Manager" button. email (used to recover an account. password), and choose a Uncheck "Allow creating password. more accounts..." unless you plan to create multiple logins to access the same Tag Manager. 1 If your Ethernet Tag Manager came with Wireless Sensor Tag(s) as a set, the Tags are already associated with the Tag Manager. In this case, you will see a list of tags immediately after Step 1, and you can skip this step. If you purchased new Wireless Sensor Tags separately from the Tag Manager, follow this step to associate the new Tags with your Tag Manager. In the tag list screen, tap "+" An unassociated tag When an unassociated tag is button at the lower right periodically broadcasts found, its information is corner. information about itself displayed. Assign a name when powered on. Click and comment (optional) to "Scan" button to receive this the tag, then tap "Associate". information. 2 You can edit tag names, comments and assign pictures to each Wireless Sensor Tag. Assign Picture Tap the picture icon in each Take the picture and use The picture is now assign to Tag's screen to bring up the finger to move or scale. the tag, and will be camera, or delete the automatically visible on picture if you already have other devices accessing the one for the tag. same tag list in a few seconds. Edit Name In the tag list screen, tap on Tap at the right end of "Edit The new name is now the tag you want to edit to name:" row to edit the tag assigned to the tag, and is open the tag screen. name, and tap "Done". automatically propagated to all other devices accessing the same tag list. 3 Motion sensor, temperature monitoring, and out-of-range notification are turned off until they are needed to conserve battery. Follow the steps below to turn them on/off as needed. Motion Sensor Tap the tag of interest on Instead of When motion sensor is the list screen to open the arming/disarming motion armed, the tag on the list details screen, and tap the sensor for each tag will have a black keypad icon at the bottom. individually, you can also background. tap the keypad icon in the tag list screen to arm/diarm all motion sensor tags. 4 Temperature Monitoring Open the temperature The temperature sensor Turn on "Monitor sensor options for each tag often needs calibration to Temperature", choose individually by tapping the remove an offset. In the notification settings you gear icon at the bottom. "Calibrate Temperature at want, and tap "Save". The Tag" section, set the correct tag will notify you when the current temperature, and temperature exceeds upper tap the "Calibrate" button. or lower limits, or returned to normal range. Out-of-Range Notification Tap the refresh icon at the Tap the gear icon at the Set the notification methods bottom of tag list screen, bottom right corner to open you want and tap "Save". and choose any of the "Out of Range Options" for "Update every ..." options. specific tag or all tags on Longer interval results in list. longer battery life but longer the out-of-range notification delay, and vice versa. 5 Tune the sensitivity and responsiveness of the motion sensor to suit your application. In motion detection mode, choose to remember moved state indefinitely or reset to armed state after a while. In door/gate mode, choose the threshold angle (23 degree is recommended for automatic garage doors, 2~5 degree for regular doors), or choose to get notified only when door is opened for too long. Choose to get notified by emails, tweets, speech, or whether to make tag beep upon motion. Set the schedule to automatically arm or disarm the motion sensor at certain time of the day, and days of the week. Sensitivity/Responsiveness Tap the gear icon at the You can choose sensitivity When door/gate mode is bottom of tag list to open (50% is recommended to enabled, you can choose the the Options screen for all eliminate false alarms in threshold angle, when tag motion sensor tags on the most environment), and orientation changes more list, or on the details screen responsiveness ("Slow" is than this, the door is for each tag to open the 12x the delay and battery deemed open, when tag Options screen for that life of "Fast") that best suit orientation returns within individual tag. your application. this threshold, it is deemed closed. 6 Notification Settings When not in door/gate When in door/gate mode, You can choose to be mode, after movement is you can choose to be notified by email, have the detected, by default the notified only when it is been system post a tweet on your system remembers the tag open for longer than a Twitter account, beep or has been moved certain time period. speak on your phones, or indefinitely. Instead you can make the tag beep. choose to have the tag automatically reset to armed state after a while. Arm/Disarm Scheduling Each tag has two sets of auto-arming/disarming schedule, each for specified days of the week (mutually exclusive). Specify time of day to disarm (for example, in the morning), and arm (for example, after dark), for each of the checked days of the week. 7 Every wireless sensor tag has a beep function to help you find missing tags. Attach the tag to key chains, put inside your wallet, or strap to TV remote controls, and never waste time looking for these items again. In the tag list screen, tap on Beep the tag by tapping on You can choose beep until the tag you want to beep. the speaker button at the moved, for 5,10,15,20,30 The tag details screen upper right corner. To seconds, or indefinitely opens. change beep options, scroll beep until stopped by the down until you see "Beep stop beep button at the option". Tap on it to choose bottom of the tag details the option. screen. 8 Each tag automatically logs temperature and each time it is moved, opened or closed, so you can always check what happened while you were away. Door Stats In the tag detail screen, For every day in the past 2 When you tap on anywhere scroll down and tap on months (when there is data on the graph for a particular "Door Stats" button. available), number of times date, a detail history for that door is opened and average day is displayed. You can duration vs. time of the day sort by time of the day, how are displayed. long the door has been open, or event type (opened or moved). Temperature Stats In the tag detail screen, For every day in the past 2 scroll down and tap on months (when there is data "Temperature Stats" button. available), temperature at that tag and battery voltage vs. time of the day are displayed. © 2010-2012 Cao Gadgets LLC 9