1
Download DCFM Professional Plus User Manual
Transcript
3 Editing a call home center Editing the EMC call home center To edit an EMC call home center, complete the following steps. 1. Select Monitor > Event Notification > Call Home. The Call Home dialog box displays. 2. Select the EMC call home center you want to edit in the Call Home Centers table. 3. Click Edit Centers (beneath the Call Home Centers table). The Configure Call Home Center dialog box displays (Figure 32). FIGURE 32 Configure Call Home Center Dialog Box (EMC option) 4. Make sure the EMC call home center type displays in the Call Home Centers list. 5. Select Enable to enable this call home center. 6. Set the time interval at which to check the call home center by selecting the Set the heartbeat interval at ___ days (1-28) check box and entering the interval in the field. 7. Enter the phone number or extension of the local server in the Local Server - Modem # field. 8. Enter the identification number of the local server in the Local Server - Cabinet Serial # field. 9. Enter the site name for the local server in the Local Server - Site Name field. 10. Click Send Test to test the Connect EMC application. The selected call home center must be enabled to test the Connect EMC application. A faked event is generated and sent to the selected call home center. You must contact the call home center to verify that the event was received and in the correct format. 11. Click OK. The Call Home dialog box displays with the call home center you edited highlighted in the Call Home Centers table. 12. Click OK to close the Call Home dialog box. 84 DCFM Professional Plus User Manual 53-1001356-01
