Download SP-3000 control System Instructions
Transcript
SP-3000 Operation Manual CHAPTER SEVENTEEN YASKAWA Inverter 1. YASKAWA inverter parameter: Parameter Name Setting A1-00 Language selection 0 A1-01 Parameter grade 2 A1-02 Control mode selection B1-01 Frequency selection instruction 0 B1-02 Running selection instruction 1 B1-03 Stopping ways selection 0 B1-04 No reverse rotating 0 B1-05 Run selection below the minimum frequency 0 B1-06 Control terminals twice scan time selection 1 B2-01 Direct current frequency brake 0.5 B2-03 Direct current when starting brake 0 B2-04 Direct current when stopping brake 0.5 B3-01 Speed search selection when starting 1 B4-01 On Delay time 0 B4-02 Off Delay time 0 B5-01 PID control selection B6-01 DWELL frequency B6-02 DWELL starting time 0 B6-03 DWELL frequency 0 B6-04 DWELL stopping time 0 B7-01 Droop control increase 0 B7-02 Droop control delay time B9-01 Zero servo increase 5 B9-02 Zero servo fulfill width 10 C1-01 Accelerating time 1 C1-02 Decelerating time 1 C1-03 Accelerating time 2 0 C1-04 Decelerating time 2 0 3 (closed loop) mode 0 starting 0 stopping 60 0.05 Remark