Download Manual

PSU Programming Manual
Output Commands
:OUTPut:DELay:ON ........................................................... 70
:OUTPut:DELay:OFF .......................................................... 70
:OUTPut:MODE .................................................................. 71
:OUTPut[:STATe][:IMMediate] .......................................... 71
:OUTPut[:STATe]:TRIGgered ............................................ 71
:OUTPut:PROTection:CLEar ............................................. 72
:OUTPut:PROTection:TRIPped ......................................... 72
Set
:OUTPut:DELay:ON
Query
Description
Sets the Delay Time in seconds for turning the
output on. The delay is set to 0.00 by default.
Syntax
:OUTPut:DELay:ON {<NR2>|MINimum|MAXimum}
Query Syntax
Parameter
:OUTPut:DELay:ON?
<NR2> 0.00~99.99 seconds, where 0=no delay.
Return parameter "0.00"
Returns the delay on time in seconds until the
output is turned on.
Set
:OUTPut:DELay:OFF
Query
Description
Sets the Delay Time in seconds for turning the
output off. The delay is set to 0.00 by default.
Syntax
:OUTPut:DELay:OFF {<NR2> |MINimum|MAXimum}
Return Syntax
Parameter
:OUTPut:DELay:OFF?
<NR2> 0.00~99.99 seconds, where 0=no delay.
Return parameter "0.00"
70
Returns the delay off time in seconds until the
output is turned off.