Download User Manual - Olivia Solutions
Transcript
Documentation. Sample for storing information or a checklist of things to be confirmed. General. These are “normal” quality samples. They contain measurement results resulting in the conformity or nonconformity of the batch. Depending on how the results are managed, the sample may or may not be “by items”. In a sample managed by items, measurements are made for every part manufactured or received. Each measurement therefore has N results instead of just one. Example: diameter of an implant. If you measure 10 parts, you have 10 diameters. A sample not managed by individuals has a single result. For example: richness of mixture = 97%. This is a single result for the whole sample. Although there is a flag to establish whether or not the sample is by items, it is important to know that there are two restrictions: An identification sample must be by individuals (although it is possible to have just one individual). A sample library sample cannot be by items. The other two types may or may not be by individuals. Plan = what + when, but who? Going back to the standard definition above, the analyses specify “what” procedures and associated resources must be applied. “When” is defined using the samples: there can be a sample for each operation or just one at the end of manufacturing. The same thing happens with the receipt of raw materials: there may be just one sample, or the tasks can be divided into several: document review, identification, purity analysis, etc. The question of “who” applies the procedures still needs to be answered. To do this, the quality plan offers two features: the evaluation schema and working groups. PQM 9