Download here - Snap-on Equipment

Introduction and Equipment Overview
User PC Function
The analyzer is designed to provide full access to all standard PC
capabilities running on Windows 2000.
Two modes of operation are possible:
• Inspection Mode
• PC Mode
Inspection Mode
Use this mode to perform state inspections after a valid
authorization access code is entered. The inspection mode is
secure. You can neither access nor change the operating program
and stored data. The computer is equipped with "logical" security
and code encryption, which prevent unauthorized access.
Attempting to "crack" the system renders the unit non-operational
and you will be charged for any service call required to return the
analyzer to service. The state is also notified of the attempt to
tamper.
PC Mode
Use this mode to operate the analyzer like a standard PC with
Windows.
✓
Different access codes are required than for Inspection
Mode.
All Windows 2000 compatible programs can be loaded and run on
the PC, including ShopKey shop-management and vehicle repair
software programs available from your Snap-on representative.
The analyzer is equipped with a DELL computer that has the
following minimum specifications:
• 2.00 GHz or faster processor
• 128 MB RAM
• 40 GB hard drive
• 56 K modem
• 16x DVD drive
• 3.5" floppy drive
• Spare USB port (on front of PC, behind lower cover)
• Spare RS232 communication port (back of the analyzer)
If you are unfamiliar with PC hardware or Windows software, it is
strongly recommended that you obtain instructional materials
before attempting to use the PC functions.
The analyzer system warranty does not cover the installation,
training, technical assistance or repair of any software on the PC
side of the analyzer. All software you install or devices you connect
to your system are solely your own responsibility.
If a virus infects your computer, it is your own responsibility. We
strongly recommend that you purchase and install virus protection
software, such as Norton AntiVirus.
All service calls necessary as a result of user-installed software,
hardware or the occurrence of a virus will be billed to you. Service
personnel will return the unit to its original configuration and
provide suggestions to prevent additional problems. EquiServ
does not service or repair items that are not provided by Snap-on.
1-8