Download Configuration Manual

Arctic Modbus Gateway
Configuration Manual
Tableof Contents
1. INTRODUCTION........................................................................................................................5
2. PARAMETERS............................................................................................................................6
2.1. Common parameters.........................................................................................................6
2.1.1. Gateway Status.........................................................................................................6
2.1.2. Gateway Mode...........................................................................................................6
2.1.3. Serial Protocol............................................................................................................6
2.1.4. Network Protocol........................................................................................................7
2.1.5. Slave Response Timeout............................................................................................7
2.1.6. Inter-Frame Timeout..................................................................................................7
2.1.7. Generate Gateway Exceptions...................................................................................7
2.1.8. Pass Gateway Exceptions...........................................................................................7
2.1.9. Serial Port..................................................................................................................8
2.1.10. Serial Speed............................................................................................................8
2.1.11. Serial Data Bits........................................................................................................8
2.1.12. Serial Stop Bits........................................................................................................8
2.1.13. Serial Parity.............................................................................................................8
2.1.14. Serial Flow Control...................................................................................................9
2.1.15. Server TCP/UPD Port................................................................................................9
2.1.16. Maximum Number of Clients....................................................................................9
2.1.17. Connection Idle Timeout..........................................................................................9
2.1.18. Enable Keepalive.....................................................................................................9
2.2. Routes............................................................................................................................10
2.2.1. Route in Use............................................................................................................10
2.2.2. Host.........................................................................................................................10
2.2.3. TCP or UDP Destination Port.....................................................................................10
2.2.4. Filter Slave Address.................................................................................................10
2.2.5. Address to Filter.......................................................................................................11
2.2.6. Connection Idle Timeout..........................................................................................11
2.2.7. Enable TCP Keepalive...............................................................................................11
3. CONFIGURING NETWORK MASTER TO SERIAL SLAVES MODE..................................................12
3.1. Settings – Common parameters......................................................................................13
3.2. Saving Parameters..........................................................................................................14
4. CONFIGURING SERIAL MASTER TO NETWORK SLAVES MODE..................................................15
4.1.Settings – Common Parameters........................................................................................16
4.1.1. Saving Common Parameters....................................................................................17
4.2.Settings – Routes.............................................................................................................18
4.2.1. Saving Routes..........................................................................................................19
4.3. Making Settings Permanent.............................................................................................19
Copyright © 2004, Viola Systems Ltd.
Page 4