Transcript
PPP520 IN THE BOX CHARGING THE POWER PACK LOCATION OF CONTROLS 5 } 4 1 2 3 } { FOR SMAR TPH ON ES } PPP520 | USER MAN UAL This manual will help you enjoy your new product } SLIM POWE R PACK Questions? Need some help? 1. [ Slim Power Pack S LI M P O W E R PAC K { FOR SMARTPHONES } PPP520 | USER MANUAL Questions? Questions? Need some help? NeedThis some manualhelp? will help you If you still have questions, call our help line: or visit us at: 1-877-768-8481 Click on “Product Support” www.southerntelecom.com This manual will new help product you enjoy your enjoy your new product you still have questions, If Ifyou still have questions, call our help line: call our help line: 1-877-768-8481 1-877-768-8481 Micro USB Charging Cable or visit us at: ] button: power ON/OFF • Power/flashlight ON/OFF • Power capacity check 2. Micro USB input charging port - for charging the Slim Power Pack 3. LED power level status lights 4. LED flashlight 5. USB output charging port - for charging devices such as smart phones Click on “Product Support” Click on “Product Support” User Manual USING THE POWER PACK USING THE POWER PACK To charge devices with the Slim Power Pack: 1. Connect the USB end of your device’s charging cable to the USB output charging port on the Slim Power Pack. 50-75% capacity >75%capacity This product as supplied and distributed new by AIT, Inc. (“AIT”) to the original consumer purchaser is warranted by AIT against defects in material and workmanship for a period of one year from your date of purchase (“Warranty”). In the unlikely event that this product is defective, or does not perform properly, you may within one year from your original date of purchase return it to the authorized service center for repair or exchange. TO OBTAIN WARRANTY SERVICE: • Call the Customer Support number located below, or go to our website portal to receive an SRO number. • Provide proof of the date of purchase within the package (Dated bill of sale). • Prepay all shipping costs to the authorized service center, and remember to insure your return. • Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package. • Describe the defect or reason you are returning the product. PLR IP Holdings, LLC, its licensees and affiliates, fully support all electronic waste initiatives. As responsible stewards of the environment, and to avoid violating established laws, you should properly dispose of this product in compliance with all applicable regulations, directives or other governances in the area where you reside. Please check with local authorities or the retailer where you purchased this product to determine a location where you can appropriately dispose of the product. USB NOTE: If the device you are charging draws too much power from the Slim Power Pack, it will stop charging and go into standby mode. If this happens, unplug the device from the Slim Power Pack, then recharge the Slim Power Pack to get it back into charging mode. 25-50% capacity LIMITED WARRANTY Charging the Slim Power Pack 2. Connect the other end of your device’s charging cable to your device’s charging port (please refer to your device’s user guide for charging). Activating the LED Flashlight To use the LED flashlight, double press the [ turn it on. Press again to turn it off. To check if the Slim Power Pack is charged: Press the [ ] button to check the power capacity. The power level status LEDs will light up according to available power capacity. <25% capacity Capacity: 5200mAh Input: DC5V 800mA Output: DC5V 1000mA or visit us at: www.southerntelecom.com www.southerntelecom.com To charge the Slim Power Pack: 1. Connect the small end of the included Micro USB cable to the Micro USB input charging port on the Slim Power Pack. 2. Connect the large end of the included Micro USB cable to an available USB port on your computer or an AC power adapter (not included). 3. The LED power level status lights will flash while the Slim Power Pack is charging. 4. The LED indicator light will turn solid BLUE when the Slim Power Pack is fully charged (approx. 6-8 hours). 5. When done charging, remove the cable from the ports. MICRO USB INPUT CHARGING PORT The shipping address of the authorized service center is: PC Charging Other Devices Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping, will require you to file a claim with the carrier. USB OUTPUT CHARGING PORT AIT, Inc. ATTN: Customer Service (2nd Floor) 14-C 53rd Street Brooklyn, NY 11232 IN NO EVENT WILL AIT, ITS MANUFACTURERS, DISTRIBUTORS OR PLR IP HOLDINGS, LLC BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) RELATED TO THIS PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. ] button to Questions? Need some help? This manual will help you enjoy your new product If you still have questions, call our help line: or visit us at: 1-877-768-8481 Click on “Product Support” www.southerntelecom.com • Consult the dealer or an experienced radio/TV technician for help. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Increase the separation between the equipment and receiver. • Reorient or relocate the receiving antenna. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment.